dmesg - linux benchmark
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bea6dfff] usable
BIOS-e820: [mem 0x00000000bea6e000-0x00000000bec45fff] reserved
BIOS-e820: [mem 0x00000000bec46000-0x00000000bf03dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf03e000-0x00000000bf15bfff] reserved
BIOS-e820: [mem 0x00000000bf15c000-0x00000000bf15cfff] usable
BIOS-e820: [mem 0x00000000bf15d000-0x00000000bf362fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf363000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970A-DS3P, BIOS FC 06/01/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd800-0x000fd80f] mapped at [c00fd800]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x01793000, 0x01793fff] PGTABLE
BRK [0x01794000, 0x01795fff] PGTABLE
RAMDISK: [mem 0x362fa000-0x37174fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0xBF023070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0xBF0283F8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI: DSDT 0xBF023160 005292 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0xBF038F80 000040
ACPI: APIC 0xBF0284F0 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0xBF028590 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0xBF0285D8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0xBF028618 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0xBF028650 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: BGRT 0xBF029D68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
8310MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x01796000, 0x01796fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0x3effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbea6dfff]
node 0: [mem 0xbf15c000-0xbf15cfff]
node 0: [mem 0xbf363000-0xbf7fffff]
node 0: [mem 0x00001000-0x3effffff]
On node 0 totalpages: 2088616
free_area_init_node: node 0, pgdat c1654b80, node_mem_map f1b1a020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3997 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 16621 pages used for memmap
HighMem zone: 1860877 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f797b000 s35328 r0 d22016 u57344
pcpu-alloc: s35328 r0 d22016 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2086836
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Initializing HighMem for node 0 (000379fe:0023f000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 8256876K/8354464K available (4588K kernel code, 517K rwdata, 1444K rodata, 652K init, 460K bss, 97588K reserved, 7443508K highmem)
virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc1669000 - 0xc170c000 ( 652 kB)
.data : 0xc147b67e - 0xc1667480 (1967 kB)
.text : 0xc1000000 - 0xc147b67e (4589 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:2304 nr_irqs:1288 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4018.270 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.54 BogoMIPS (lpj=16073080)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (c170c000 - c1711000)
ftrace: allocating 20698 entries in 41 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f754e000 soft=f7550000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
CPU 2 irqstacks, hard=f75a2000 soft=f75a4000
#2
Initializing CPU#2
CPU 3 irqstacks, hard=f75d6000 soft=f75d8000
#3
Initializing CPU#3
CPU 4 irqstacks, hard=f762a000 soft=f762c000
#4
Initializing CPU#4
CPU 5 irqstacks, hard=f765c000 soft=f765e000
#5
Initializing CPU#5
CPU 6 irqstacks, hard=f76b0000 soft=f76b2000
#6
Initializing CPU#6
CPU 7 irqstacks, hard=f7702000 soft=f7704000
#7
Initializing CPU#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64292.32 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbec46000-0xbf03dfff] (4161536 bytes)
PM: Registering ACPI NVS region [mem 0xbf15d000-0xbf362fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6810] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbea6e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf15d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0220-0x0227] has been reserved
system 00:02: [io 0x0228-0x0237] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14828K (f62fa000 - f7175000)
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x0600081f
microcode: CPU1: patch_level=0x0600081f
microcode: CPU2: patch_level=0x0600081f
microcode: CPU3: patch_level=0x0600081f
microcode: CPU4: patch_level=0x0600081f
microcode: CPU5: patch_level=0x0600081f
microcode: CPU6: patch_level=0x0600081f
microcode: CPU7: patch_level=0x0600081f
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1446112742.888:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1617
alg: No test for stdrng (krng)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2015-10-29 09:59:04 UTC (1446112744)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 652K (c1669000 - c170c000)
Write protecting the kernel text: 4592k
Write protecting the kernel read-only data: 1448k
NX-protecting the kernel data: 3600k
random: systemd-udevd urandom read with 0 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ohci-pci: OHCI PCI platform driver
libata version 3.00 loaded.
r8169 0000:03:00.0: irq 72 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xf820e000, fc:aa:14:c8:15:70, XID 0c000800 IRQ 72
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16-2-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16-2-686-pae xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:13.2: EHCI Host Controller
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16-2-686-pae xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.16-2-686-pae ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.16-2-686-pae ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16-2-686-pae ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.16-2-686-pae ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.16-2-686-pae ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 3.16-2-686-pae ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=2109, idProduct=3431
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 4018.655 MHz
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: ST1000DM003-1ER162, CC46, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: ST1000DM003-1ER162, CC46, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-9: ST1000DM003-1ER162, CC46, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata3.00: ATA-9: SanDisk SDSSDP064G, 3.1.0, max UDMA/133
ata3.00: 123091920 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC46 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC46 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC46 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.6 GiB)
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
sdd: unknown partition table
sd 5:0:0:0: [sdd] Attached SCSI disk
sdc: unknown partition table
sd 4:0:0:0: [sdc] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 9-1: new full-speed USB device number 2 using ohci-pci
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 227 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
usb 9-1: New USB device found, idVendor=046d, idProduct=c247
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: G100s Optical Gaming Mouse
usb 9-1: Manufacturer: Logitech
systemd[1]: mongodb.service: Cannot add dependency job, ignoring: Unit mongodb.service is masked.
systemd[1]: atd.service: Cannot add dependency job, ignoring: Unit atd.service is masked.
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Listening on Journal Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started File System Check Daemon to report status.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
fuse init (API version 7.23)
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
Switched to clocksource tsc
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[223]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
acpi-cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xf8226b00). heartbeat=60 sec (nowayout=0)
input: PC Speaker as /devices/platform/pcspkr/input/input3
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 74 for MSI/MSI-X
random: nonblocking pool is initialized
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
alg: No test for crc32 (crc32-pclmul)
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G100s Optical Gaming Mouse as /devices/pci0000:00/0000:00:16.0/usb9/9-1/9-1:1.0/0003:046D:C247.0001/input/input15
hid-generic 0003:046D:C247.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0000:00:16.0-1/input0
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7844 MBytes.
[fglrx] vendor: 1002 device: 6810 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 1 minors
Adding 2540540k swap on /dev/sda5. Priority:-1 extents:1 across:2540540k SSFS
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2)
r8169 0000:03:00.0: Direct firmware load failed with error -2
r8169 0000:03:00.0: Falling back to user helper
r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-12)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
fglrx_pci 0000:01:00.0: irq 75 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1042
[fglrx] Firegl kernel thread PID: 1043
[fglrx] Firegl kernel thread PID: 1044
[fglrx] IRQ 75 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready